iClave plus

Tired of Breakdowns?

Deploying a Copper Chamber to Match the Advanced Class B Cycle Sterilisation Capacity and Efficiency Standards

Air turbines, contra-angles, and other dynamic dental instruments consist of high-precision micro mechanisms and therefore benefit from careful sterilisation to maintain performance. NSK choose to use a highly conductive copper chamber to satisfy Class B, Europe’s strictest sterilisation standard. The system delivers outstanding efficiency despite its large capacity.

20% more capacity than conventional autoclaves

The iClave plus can fully use its 18 litre capacity because it maintains even temperatures throughout the autoclave chamber and constantly controls the surface temperature. The iClave plus offers 20% more sterilisation space than a conventional stainless steel chamber of the same size, ensuring greater safety by reducing instrument overcrowding.

Highly thermal conductive copper chamber with even temperatures

Using copper to construct the chamber gives 18 times more heat conductivity than stainless steel. The copper chamber retains even internal temperature levels throughout despite its large capacity.

Advanced heating system leveraging excellent thermal conductivity

NSK’s innovative heating system optimises the high heat conductivity of copper. Enveloping the copper chamber is a special heater which is also used in satellites, incorporating electro-thermal material embedded in silicone to heat the entire chamber evenly without heat loss.
iClave plus - heating system

NSK autoclave benefits include combining high heat conductivity of copper chamber with proprietary heating system

Faster sterilisation

The copper chamber and adaptive heat system allows sterilisation in 18 and 35 minutes under Class S and B standards, respectively. (Including drying phase.)

More efficient drying phase

In a conventional chamber, uneven temperatures cause condensation inside instruments, reducing drying efficiency. This issue is almost non-existent in the iClave plus when temperatures rise or fall.

More economical and environmentally friendly

A key factor in the greater efficiency of the iClave plus is that it can sterilize more instruments at a time. The iClave plus also lowers environmental impact because it consumes less electricity and water.

Gentle handpiece sterilisation

Consistently even internal temperatures resulting from the use of a copper chamber and the adaptive heat system make it possible to control steam flow and eliminate heat fluctuations. With less thermal impact, sterilization of air turbines, contra-angles and other instruments is gentler and safer.

Tech Spec

iClave Plus
iClave Plus

An 18 Litre Model Complying with the Top Sterilisation Standard

Employing a copper chamber to minimise internal temperature fluctuations. Efficiently sterilising more instruments while minimising wasted space.

iClave plus Complete Set

MODEL: iClave plus 230V ORDER CODE: DXY1003077

External dimensions : W445 x D532 x H428 (mm)
Chamber dimensions : ø240 x 384 (mm)
Chamber capacity : 18 litre
Net weight : 55 kg
Maximum power consumption : 1,900 W
Supply Voltage CE : 230V – 50Hz
Air expulsion system : Vacuum pump 1, 3, 4 vacuum
Max Load : 4 kg (solid), 1.5 kg (porous)

  • External dimensions exclude protrusions
iClave Plus
*Specifications are subject to change without notice.
© NSK / Nakanishi inc. All rights reserved.